Thyristor Controlled Industrial Battery Chargers
STATCON ENERGIAA offers highly reliable and rugged Industrial Battery Charger solutions for all such DC Power Supply applications. Be it Power Generation, T&D, Defence, Telecom, Oil & Gas, Railways or other industrial applications, STATCON ENERGIAA has shown its presence felt. These Industrial Battery Chargers are available in both natural cooled as well as forced cooled designs. With In house transformer manufacturing, fitting and wiring facilities, it is possible to maintain strict quality control over the whole process. The team of designers with documentation personnel helps in supplying custom-built solutions to all Rectifier / Battery charging needs of those who want customised solutions. Built over glass epoxy board, the control circuit uses advanced Digital and analog circuit blocks and suitable customization is done for all special application of the user. The special design feature of STATCON ENERGIAA’s Industrial battery charger is high transient response under specified load & line variations.
STATCON ENERGIAA offers various charger configurations like Float-cum-Boost Charger with dropper diodes, Dual Redundant Systems, Float & Float Cum Boost Charger, Dual Float-Cum-Float Boost Charger System and Multiple charger system with redundant (standby) charger etc.
However, needs of proper battery charging are always kept in mind so as to get best state of charge and life of the battery bank used.
|The broad technical parameters of the charger are:-|
|Input voltage||230V ± 15%, 415 ± 15%, 50 Hz|
|Ambient||Up to 550C|
|Altitude||Up to 1000 meter above MSL|
|Output Voltage||24V/36V/48V/96V110V/220V Nominal (Other Voltages also possible on request)|
|Output Current||15A – 1500A (Higher ratings also available)|
|Output Regulation||< 1%|
|Efficiency||Up to 92% depending upon rating|
|Ripple||Up to 400mv pp or as per requirement|
|* The above Parameters are subject to change without prior notice due to continuous improvement in technology.|