Industrial battery chargers and rectifiers

Chargers for tubular batteries

Name: Chargers for tubular batteries
Brand: Statcon Energiaa

Industrial charger for tubular-plate sealed and flooded lead-acid batteries, 24–220 V DC up to 1,000 A.

24/48/110/220 V DC, up to 1,000 A

Overview

What it does

This Statcon Energiaa battery charger is designed for batteries with tubular plates and can charge sealed lead-acid and flooded lead-acid batteries.

It runs from a 415 V three-phase supply and is available at 24, 48, 110 and 220 V DC with output current up to 1,000 A.

Automatic float and boost settings, temperature compensation and a battery health test are built in.

Features

Designed for batteries with tubular plates
Temperature compensation for VRLA batteries
Automatic float and boost voltage setting on selection of battery type and number of cells
Automatic float-to-boost and boost-to-float changeover current set from battery Ah capacity
Battery health test facility
AC/DC voltage and current calibration

Specifications

Configured to order. Full details are in the datasheet.

Input voltage	415 V ±10%, 50 Hz ±3 Hz, 3-phase AC (other ranges on request)
Output voltage	24 V / 48 V / 110 V / 220 V (other voltages on request)
Output current	Up to 1,000 A (higher ratings on request)
Voltage regulation	Within ±1% for input mains variation and 0–100% load variation (diode drop excluded)
Current regulation	Within ±2.5% for input mains variation
Output ripple	Up to 2% RMS or as required
Overload	Current limit adjustable up to 110%
Operating temperature	0 °C to +55 °C
Communication	Wireless via GSM modem or RS 232/485; serial communication port
Enclosure	Free-standing, floor mounting
Battery types	Tubular-plate batteries: sealed lead-acid and flooded lead-acid

Typical values. Ratings and options may vary by model; confirm with the latest datasheet.

Downloads

Get in touch

Need this configured for your site? Share the voltage, current and site conditions. An application engineer will reply with a configuration.